Dental Surgical Ceramic Soft Tissue Trimmer Bur for Gingivectomy
Description:
1.Soft tissue trimming needle2.Characteristics and use method3.Cutting soft tissue does not bleed4.Cut excess gum tissue5.Cuff trimming for planting nest6.Good effect for gingival drainage7.High speed creates hot condensation to stop bleeding8.Strong wear resistance9.Mounted on a high-speed turbine10.Speed: 300,000-450000 rpm11.Recommended air pressure :3.0-3.2MPa12.Matters needing attention13.High speed cutting, not cold forever14.At a 45° Angle to the cutting surface15.Press lightly, not too hard16.The incision is smooth and conducive to healing17.Appropriate use of linen materials18.The RPM is too low to stop bleeding19.Larger operation space than electric knifexerosis
1.For cutting soft tissue. Keep the soft tissue trimming bur at an angle of 90 degrees to the cutting surface and press gently.
2.For gingival retraction. Place the needle in the gingival sulcus, close to the gum side at a 45-degree angle to the long axis of the tooth, and rotate 3-4 clockwise or counterclockwise to gingival effect. This method removes gingiva quickly and reduces bleeding.
3. For cutting small amounts of hyperplastic gums.
Feature:
1.Normal disinfection in hot air sterilizer or autoclave. During the entire disinfection process, make sure that nothing else can be damagedTip of soft tissue bur.
2.The ceramic working part of the bur is more sensitive than conventional surgical steel or tungsten steel burs. If using a disinfectant solution for cleaning, soft tissueThe bur must be carefully inserted into the tweezers.
3. After reaching the prescribed time, remove the soft tissue needle from the disinfectant solution, rinse and dry.
Package : 1 Pcs/Bag
