Dental Composite Resin Heater Material Warmer Soften 40/45/50℃ Adjustable
Description:
AR heater is designed for heating inlays and dental veneers to improve the flowability during bonding,preventing premature curing of the composite material and heating the resin, injection nozzle, anestheticetc. AR heater adopts the precision circuit to control its heating module, and keep the temperature within ±1℃. Depending on the material and personal choice, the temperature canset to : 40℃, 45℃ and 50℃.
Composition：
1.Filter cover
2.Heating plate
3.Honeycomb heating barrel
4.Heating base
5.Indicator light
6.On/OFF
7.TEMP button
8.DC
9.Power adapter
Operation：
1.Place the heating base on a flat tabletop
2.Plug in the power adapter, then press the button "On/Off" to start heating. (Default 40 ℃ after power on)
3.After power on, single click "On/Off" to select the required heating temperature (40 ℃，45℃，50℃). The corresponding temperature indicator flashes during heating. When the indicator turns from flashing to ever bright, it means that it already reaches the required temperature. After that, it goes into insulation. Please refer to product specification.
Technical Parameters：
1. Power Adapter:
2. Input: 100-240V AC 50/60Hz
3. Output: DC 12V 2A
4. Power:24W
5. Temperature Setting: 40±1℃， 45±1℃ and 50±1℃
6. Filter Range: (light<500 nm) can't pass through the filter cover
