I.Product overview
Gcx-b dental electric extractor, which USES a four-layer filter and anion ULTRAVIOLET dualelimination,
including washed cotton, primary,medium and high efficiency filters,
can purify the air to 99.97% to prevent environmental pollution and cross infection.
II.Product filtering features
III.Product filtering features
|
Model
|
GCX-B |
| Input Voltage |
220V 50Hz |
| Power |
250 W |
| The Noiser |
＜62dB |
| Filtration precision |
Can be up to0.3um99.97% |
| Folding arm length |
140cm |
| The machine size |
420x240x520 |
| The net weight |
16kg |
IV.The installation
①----------Suction hood
②----------Folding arm
③----------Folding arm
④----------Concave handle
⑤----------The control panel
⑥----------The remote control
⑦----------Mute caster
V.Installation instructions
（1）Open the top cover of the main engine, load the high efficiency filter, medium efficiency filter
and primary efficiency cotton into the chassis in turn, cover the top cover and fasten the clasp on both sides.
◆Note: The top cover must be mounted smoothly on the box body;When there is a tilt, do not force into, or it may damage the box and the buckle.
（2）Put the folding arm on the flange of the top cover and connect the other end of the suction hood;Turn the tube and adjust the direction of the
smo king hole according to the different height.
◆Note: When adjusting the direction of the folding arm, keep the bending as gentle as possible, otherwise the suction force will be affected.The
intake port should be facing the working point and kept within 150mm as far as possible to ensure that the aerosol can be fully inhaled.
（3）Connect the power cord and check whether the power plug is stable and firm.
（4）CTurn on the power switch and adjust the air volume according to the actual demand
VI.Requirements:
（1）The filter element should be replaced regularly to ensure that the machine works in good condition. Before replacing and maintaining the
filter system, please be sure to cut off the power first!
（2）The folding arms should be cleaned regularly
(usually about 2-6 months, depending on the specific working environment).
（3）Washable cottons should be washed or replaced frequently.
（4）The primary filter sponge can be replaced as often as needed.
（5）When the adsorption capacity decreases, check whether the primary and middle efficiency
need to be replaced.If the suction is still low after replacement, replace the new hePA filter.
（6）When installing and removing the filter element, hold the surrounding border with both
hands and slowly put it in and take it out.
◆Note: Do not use head or hand to lift the inside of the filter element during handling to avoid deformation or damage of the filter material,
which will affect the filtering effect.
VII.Packing list:
| The host |
1 |
| The power cord |
1 |
| Folding arm |
1 |
| Suction hood |
1 |
| The instructions |
1 |
| Certificate of approval |
1 |
